Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 85)

CURTAIN CONTROL
If the controller is set to control a curtain, the
display will look like Figure 9.44.
The Up / Down buttons will change to Open /
Close buttons (Figure 9.45). These function the
same as the Up / Down buttons.
Curtain Indicator is a visual illustration of the
curtain’s position (Figure 9.46).
· Open target
This dark blue button shows the value for the
upper target. Blue vertical line shows the curtain
position at the upper target.
· Current position
This light blue bar shows the value of the curtain’s
current position. As the curtain moves, this red
curtain graphic will move as well.
· Alternate target
Alternate target positions are shown with gold
vertical bars.
· Close target
This green button shows the value for the lower
target. Green vertical lines show the curtain
position at the lower target.
Figure 9.44: Curtain controller
Figure 9.45: Open arrow depressed
Figure 9.46: Curtain indicator
Open target
Current position
Close target
78