Daktronics Pro Series Operations and Maintenance Manual User Manual

Page 76

Curtain Setup

If the selected motor controls a bi-part curtain then

the display will be different. Note that the symbols

on the blue and green buttons have changed from

arrows to open and close icons. Curtain Setup mode

allows only for the setting of open and close limits

and maximum speed for the curtain.

Rename

To rename a motor, touch RENAME on the Modify

Motor screen (Figure 9.16). The Rename panel will

display (Figure 9.17).
Enter a new name by using the VAC keyboard.

Names can only contain letters and numbers (max

25 characters) and must be unique. Renaming is

not an option if the motor is part of a group.
Touch CONFIRM to change the name of the motor

to the entered name.

SETUP

Figure 9.17: Rename panel

Figure 9.16: Curtain setup panel