Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 13)

Pro Series controller
Control of all hoists is possible from the Daktronics VAC console. The hoists can be controlled individually, and
operated at various speeds. Please see the Controls Operating portion of this manual for the operating procedures.
WARNING
If it is necessary to operate a hoist from a location where the operator's view of the moving
load is obstructed, a second person must be used to observe the load and communicate to
the operator.
Specifications
WARNING
The Vortek hoist must only be used with a maximum load equal to the capacity stated for your
model below. Overloading the system may result in serious injury or an inoperable system.
THE FOLLOWING MODELS ARE VARIABLE SPEED AND DESIGNATED TO BE CONTROLLED THROUGH
THE VORTEK AUTOMATION CENTER (VAC ® ). THE VAC IS A STAND ALONE AUTOMATION SYSTEM.
USA VAC ® based models and applications
VAC - Single Purchase
MODEL NUMBER LOAD LBS (kg) SPEED FT/MIN (M/SEC)
V_-0820 0 - 800 (362) 0 - 20 (.1)
V_-12180 0 - 1200 (540) 0 - 180 (0.914)
V_-14120 0 - 1400 (635) 0 - 120 (.6)
V_-1740 0 - 1750 (790) 0 - 40 (0.203
V_-2020 0 - 2000 (900) 0 - 20 (0.101)
H_-22230 0 - 2200 (1000) 0 - 234 (1.2)
H_-4020 0 - 4000 (1814) 0 - 20 (.1)
VAC - Double Purchase
MODEL NUMBER LOAD LBS (kg) SPEED FT/MIN (M/SEC)
V_-0820 0 - 1600 (725) 0 - 10 (.05)
V_-12180-2 0 - 2400 (1080) 0 - 90 (0.457)
V_-14120 0 - 2800 (1270) 0 - 60 (.3)
V_-1740-2 0 - 3500 (1580) 0 - 20 (0.101)
V_-2020-2 0 - 4000 (1800) 0 - 10 (0.050)
H_-22230 0 - 4400 (2000) 0 - 117 (.6)
H_-4020 0 - 8000 (3628) 0 - 10 (.05)
Maximum travel distance is 65' (19.8 m) for Single Purchase Units, 32.5' (9.9 m) for Double Purchase Units.
6