Daktronics Pro Series Operations and Maintenance Manual User Manual
Page 58
Figure 7.39: Screen showinleted
CUEING
51
Figure 7.51: Selecting DISABLE from the alert box
Figure 7.52: Cue actions with disabled motors display in
red, such as Cue 3.00, Cue action 0 above.
Disable
To disable a motor so that it doesn’t move again,
select it by touching its name in the Faulted Motor
list, then touch DISABLE. Touch CONFIRM to
continue/disable the motor (Figure 7.51).
Cues with disabled motors are displayed in red text
(Figure 7:52).
Note: Once a motor is disabled, it will not move
again and can only be enabled by an administrator
using the Motor Restrict module.