Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 65)

Figure 8.13: Target controls are deactivated while
the joy-stick is used to set the target value.
Figure 8.14: Delete preset
Joystick
To control the motor (and change the target value)
with the left joystick, touch the JOYSTICK button
under the arrow buttons.
The button will change to read FINISHED and all
other controls are deactivated (Figure 8.13). The
Vortek is now ready to move the motor with the left
joystick. The motor will move faster the farther you
push the joystick away from center.
When the batten is in the correct position, touch
FINISHED to activate the rest of the controls and
deactivate the joystick. The position of the motor
will now be used for the preset target.
DELETE PRESET
The list of presets is on the left of the screen(Figure
8.14). Select a preset by touching its name in the
list. The ACCEPT button is activated after selection.
To permanently remove the preset, touch ACCEPT.
To return to the main screen with no changes,
touch EXIT.
58