Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 71)

MOTOR SELECTION
Select a motor by touching the yellow button at the
top of the controller as shown in Figure 9.3.
The bar with the current motor expands to show a
list of all available motors, with grouped motors
shown in blue (Figure 9.4).
Move through the list by using the:
• Slider
• PgUp
• PgDn
Touch the name of the desired motor or group to
select it. It will highlight and CONFIRM will activate
(Figure 9.5).
Touch CONFIRM to verify selection.
Note: Before touching CONFIRM, the operator
may change the selection by touching a different
motor name.
Figure 9.3: Motor Select button
Figure 9.5: Motor selected
Figure 9.4: Motor Select screen
64