Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 62)

Figure 8.4: Create screen
Order controls Target controls
Figure 8.5: Order controls
PRESETS
Create
On the left side of the screen, the Order controls
determine in what order the motors are moved; on
the right side, the Target controls, specify where a
motor will move to (Figure 8.4).
In a new preset, the default order is determined
at commissioning and usually runs from downstage to
upstage. The default target for a motor is its current
position.
Order Controls
The Order controls (Figure 8.5) change the motor
sequence, remove motors from the preset or add all
omitted motors back into the preset.
55