Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 68)

Figure 8.20: Preset running.
Figure 8.19: Run screen
PRESETS
Run screen
At the run screen (Figure 8.19) there are
two options:
• To run the selected preset, touch START.
• To cancel this function and return to the
main Presets screen, touch EXIT.
Touch START to run the preset. The first motor of
the preset will begin moving to its target (Figure
8.20) while the PAUSE and STOP/CANCEL
buttons activate.
Touch PAUSE while the preset is running to stop
the motor.
Touch STOP/CANCEL to stop running the preset
and return to the main Presets screen.
61