Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 78)

BATTEN POSITION INDICATOR
This displays the batten's position visually and
numerically relative to its upper and lower limits
(Figure 9.21). The batten upper and lower limit
values are also displayed.
Upper limit
This dark blue button shows the value for the
upper limit. Touching this is another way of
setting the upper limit.
Current position
This light blue bar shows the position of the
batten in relation to the limits. As the batten
moves, this display will move as well.
Lower limit
This green button shows the value for the lower
limit. Touching this is another way of setting the
lower limit.
SET/CLEAR LIMITS
To change the limits, touch SET/ CLEAR LIMITS
(Figure 9.22). The screen will display the Set /
Clear Targets panel as illustrated in Figure 9.23.
SETUP
Figure 9.22: Set/Clear Limits button
Figure 9.21: Batten indicator
Upper limit
Current position
Lower limit
71