Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 29)

SPEED
The speed button is located under the Motor Select
dropdown menu (Figure 5.8). To change the speed,
touch and hold down the speed button. Slide it to the
right to increase the speed of the selected motor, or
left to decrease the speed.
Above the button, the current speed is shown on the
left, while the maximum speed of the selected motor
is shown on the right.
Set Speed Numerically
Touch the speed button twice quickly (double-click)
to adjust the speed with greater accuracy,
The controller will display a keypad for manual entry
(Figure 5.9). Enter the new speed value and touch
KEYPAD to confirm the entered value.
Icon Selection
The button for icon selection is located to the right of
Motor Select (Figure 5.10). The icon for the selected
motor appears here.
To change the icon, double-click the icon to display
the Icon Selection panel (Figure 5.11).
Select a category by touching its name in the
category list. The different icons available will
display in the box on the right. Use the scroll bar
to navigate through the icons. Choose an icon by
touching it.
Touch DONE to confirm the selection, or CANCEL
to leave the function without changing the icon.
Figure 5.8: Speed button
Figure 5.9: Enter speed numerically
Figure 5.10: Icon Selection button
Figure 5.11: Icon Selection
22