Daktronics Pro Series Operations and Maintenance Manual - Manual (Page 72)

SETUP
Batten Setup
After selecting a motor, touch BATTEN SETUP
to "teach" the i-Batten safety feature. This system
detects when a batten's weight changes, such as
when it gets obstructed during a move, and
disables it as a safety precaution.
This safety feature is bypassed in Batten Setup mode
to allow you to attach curtains and scenery to the
batten. The process for Batten Setup is:
1. Choose a motor and confirm it. Three
options are displayed: BATTEN SETUP,
RENAME and CONTINUE (Figure 9.6).
Touch BATTEN SETUP. A new panel is
displayed (Figure 9.7).
2. Use the Up/Down arrows or the
joystick to lower the batten until it is
a comfortable height to work with.
Tie curtains or scenery to the batten.
3. Move the batten up until the attachment
is completely off the floor. This is the
lowest point the batten will travel to.
Touch SET LOWER LIMIT.
4. Move the batten up until it is at the
highest point you wish.
Touch SET UPPER LIMIT.
Figure 9.6: Modify Motor screen
Figure 9.7: Batten Setup screen
65