BECKHOFF EP2xxx - Manual (Page 67)

Product overview
2.14 EP2817­0008
2.14.1 EP2817­0008 ­ Introduction
Fig. 51: EP2817­0008
24 digital outputs 24 V
DC
, I
max
0.1 A
The EP2817­0008 EtherCAT Box with digital outputs connects the binary control signals from the controller
on to the actuators at the process level.
The 24 outputs handle load currents of up to 0.1 A each.
All outputs are short­circuit­proof, protected against inverse connection and can be diagnosed. An output
short­circuit is recognized and passed on to the controller
The signal connection is realized by a 25­pin D­sub socket.
The signal state is indicated for signal groups by means of light emitting diodes.
Quick­Links
Installation
Configuration [ } 32]
UL requirements for UL approved modules
Also see about this
2 EP2817­0008 ­ Status LEDs [ } 68]
EP2xxx 67 Version 2.1.0