Becker revo.2 - Manual (Page 86)

86
>>> NAVIGATION MODE
> D
> GB
> F
> I
> PL
If the automatic function is switched off,
you can select the desired time zone by
pressing the button below
Use auto time
zone .
Pressing the button below Daylight
saving time allows you to select whether
daylight saving time should be set
automatically by the Navigation device or
whether you switch daylight saving time
on and off yourself.
The Reset button
You can reset the navigation settings to
their factory settings.
The settings will then be reset. The fast
access mode data, stored routes,
blocked routes, voice and home address
are retained.
> Press the Reset button.
> Press the Yes button.
The navigation settings are reset to their
factory settings.
Traffic announcements using
TMC (depending on the model)
Your Navigation device can receive
traffic announcements (TMC messages)
from radio stations. The power supply
with the integrated TMC antenna must
be connected to the carrier plate for this
function.
Traffic announcements are transmitted
by radio stations via the TMC (Traffic
Message Channel) in addition to the
radio programme and are received and
analysed by the navigation system.
Receiving traffic announcements is free
of charge.
Note:
TMC is not available in all countries.