Service information, Factory settings, Settings – Becker revo.2 User Manual
Page 142
142
>>>
SETTINGS
> D
> GB
> F
> I
> PL
Press the Set Auto-connect button. A list
of possible telephones is displayed that
you can use as a trigger for this profile,
select the corresponding telephone by
pressing the appropriate button.
Service information
The following button displays
information regarding the Navigation
device.
> Press the
Information
button.
The information display appears with the
software version number.
By pressing the
Service information
but-
ton, you can display further information
such as used licences, installed contents
and map material. Always quote these
details in enquiries to the service provid-
ed by United Navigation GmbH.
Factory settings
You can reset your Navigation device to
the factory settings.
The following updated data is deleted:
saved destinations, saved routes, the
home address, telephone data, images,
videos etc. saved on the internal memory.
> Press the
Factory reset
button.
> Press the
Yes
button.
The Navigation device is reset to the
factory settings.
- revo.1 PROFESSIONAL 50 READY 50 ICE READY 45 ICE TRANSIT 50 TRANSIT 45 PROFESSIONAL 70 LMU professional.6 LMU ready.5 LMU transit.6 LMU TRANSIT 70 LMU pro TRANSIT 70 LMU READY 70 LMU active.6 LMU plus active.6 CE LMU active.5 LMU plus active.5 LMU active.5 CE LMU transit.5 LMU professional.5 LMU READY 50 LMU PLUS READY 50 EU20 LMU READY 50 EU20 READY 50 SE LMU READY 45 SE ACTIVE 45 READY 45 LMU READY 45 EU19 ACTIVE 43 TRANSIT PROFESSIONAL 43 CONTROL READY 43 READY 43 TRAFFIC ACTIVE 43 TRAFFIC ACTIVE 43 TALK READY 43 TALK READY 43 TALK V2 READY 43 TRAFFIC V2