Becker revo.2 - Manual (Page 82)

82
>>> NAVIGATION MODE
> D
> GB
> F
> I
> PL
Truck warnings (depending on model)
You can let yourself be warned about en-
vironmental zones provided that this in-
formation is saved in the card material
and is supported by your navigation sys-
tem. The function can be adjusted sepa-
rately for journeys with and without ac-
tive navigation. The function can be
activated
or deactivated respec-
tively. By pressing the symbol with the
bell, you can set the audible warning sig-
nal (
audible warning signal acti-
vated).
> Confirm your settings by pressing the
button.
Setting Speed info
The
Speed info settings window allows
to select whether speed limits are
displayed in parallel to the navigation.
You can also receive an audible warning
about exceeding the speed limit.
> In the Warnings settings window,
press the Speed info button.
The Speed info settings window
appears.
The following settings are available.
Note:
This information can only be displayed if
it is contained in the map material.
¤ Risk of accident!
The information in the map material
may be incorrect as a result of short-
term changes (road works, for
example).
The traffic situation and the local road
signs take precedence over the
navigation system information.
Setting Meaning
Show signs Select whether speed
limits are never
displayed, always
displayed or only
displayed if the limit is
exceeded. Furthermore,
you can select whether
the sign should blink
when exceeding the
speed limit, by selecting
Always or If speed limit
is exceeded .
In city Select the amount over
the speed limit at which
you would like to receive
an acoustic warning
within built-up areas.