Becker revo.2 - Manual (Page 55)

55
NAVIGATION MODE >>>
> D
> GB
> F
> I
> PL
> Select the desired point of interest.
You will now receive additional
information about your chosen
destination.
> Press the
Start button to begin route
guidance to the point of interest
directly.
In addition, the selected point of interest
can be:
• displayed on the map ( On map ),
• saved in fast access mode ( Save ),
• used for displaying a route to the POI
( Show route ),
• if a telephone is connected and a
phone number is available by pressing
the button with the
symbol.
(depending on the model)
Point of interest near to an address
> Press
POI near location .
> Select the desired country.
> In the City or Code field, enter the town
where you wish to search for a point of
interest.
> Press the Select category button.
The available Points of interest
categories for the city entered will be
displayed.
> Select the desired point of interest as
described under "Point of interest in
the vicinity" on page 54.
> Press the Start button to begin route
guidance to the point of interest
directly.
However, you can also store your
chosenpoint of interest in fast access
mode (
Save ) or display the route to the
point of interest ( Show route ).
Note:
If you have already entered an address,
this address will appear by default. Note:
Your can also press the Select Point of
Interest button. An input menu will then
open and you can enter the name of a
point of interest directly and confirm it.