Becker revo.2 - Manual (Page 34)

34
>>> GENERAL OPERATION
> D
> GB
> F
> I
> PL
Replacing the battery
If the Navigation device stops
responding to commands from the
remote control, the battery in the remote
control is probably dead.
> Remove the remote control as
described above.
> Remove the old battery and replace it
with a new type CR2032/DL2032
battery.
> Place the remote control back onto the
base plate.
> Reconnect the remote control to the
Navigation device as described above.
Operating the Navigation device using
the remote control
You can control most functions and the
main functions of the Navigation device
using the remote control.
It is provided with five buttons and a
control ring.
The main functions of the individual
remote control buttons are:
¤ Danger!
Keep the battery away from children.
Consult a doctor immediately if a child
swallows a battery.
Batteries must not be dismantled,
short-circuited or thrown into a fire.
Environmental note:
Batteries must not be disposed of in
household waste.
It is the legal duty of the user to return
used batteries. You can hand in your old
batteries free of charge at local
municipal collection points or wherever
batteries are sold.
Butto
n Basic function
Opens the map display. Opens
the options menu for the map
display if the map is already
active.
Starts the telephone mode. The
function is equivalent to
pressing the
Phone button in the
main menu or the button in
the options menu of the map
display.
1
3
2 5
4
6
1
2
*depending on model, must be activated via the Content Manager