Notice – Becker revo.2 User Manual
Page 153
153
NOTICE
>>>
> D
> GB
> F
> I
> PL
> Completely discharge the battery (leave the unit switched on with no power supply until it automatically switches off).
> Remove the cap using a small screwdriver
> Unscrew the housing screws (model dependent) using a small Phillips screwdriver.
> Lever off the rear of the housing using a flat-blade screwdriver (placed at the slits on the sides of the housing).
> Pull out the connector of the battery connecting cable .
> Remove the battery .
Note:
Do not reconnect a unit that you have opened to the power supply.
1
3
3
5
5
This manual is related to the following products:
- revo.1 PROFESSIONAL 50 READY 50 ICE READY 45 ICE TRANSIT 50 TRANSIT 45 PROFESSIONAL 70 LMU professional.6 LMU ready.5 LMU transit.6 LMU TRANSIT 70 LMU pro TRANSIT 70 LMU READY 70 LMU active.6 LMU plus active.6 CE LMU active.5 LMU plus active.5 LMU active.5 CE LMU transit.5 LMU professional.5 LMU READY 50 LMU PLUS READY 50 EU20 LMU READY 50 EU20 READY 50 SE LMU READY 45 SE ACTIVE 45 READY 45 LMU READY 45 EU19 ACTIVE 43 TRANSIT PROFESSIONAL 43 CONTROL READY 43 READY 43 TRAFFIC ACTIVE 43 TRAFFIC ACTIVE 43 TALK READY 43 TALK READY 43 TALK V2 READY 43 TRAFFIC V2