Becker revo.2 - Manual (Page 140)

140
>>> SETTINGS
> D
> GB
> F
> I
> PL
Driver profiles (depending on model)
You can select 4 different driver profiles.
You select the corresponding profile by
pressing the
Profile 1 – Profile 4 button.
You must then restart the navigation
system.
You restart the system by pressing on
the
Yes button.
The driver profiles can now be named
individually. This function can be useful,
for example, if several drivers use the
same navigation system.
Many settings and regular destinations
are stored in the driver profiles.
The following are stored in the driver
profiles:
• Home address
• Last destinations
• Planned routes
• Blocked roads
• Last calls
• Data in the journey computer
• Last GPS position
• Navigation settings
• Phone settings
• System settings
Off Switching off the ProActive
automatic starter
Smart
Guess
Route If this function is activated,
the next most probable des-
tination will be displayed in
the lower line of the main
menu and the route pre-cal-
culated based on your cur-
rent driving habits.
If congestion announce-
ments are on your route,
these will also be displayed
so you can drive off in the
right direction right from the
start of your journey.
Selection Meaning