Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 75)

U s i n g I m m e d i a t e C o m m a n d s
Your System Administrator can use immediate commands to reset the printer or cancel
and repeat batches. Immediate commands are turned on or off through an MPCL packet.
Your System Administrator should refer to the 9906 Packet Reference Manual (available
on our Web site) for more information about immediate commands and control characters.
Use this option to set whether the ADK script processes or ignores an immediate
command control character.
To enable the ADK script to process immediate commands, from the Main Menu select
Scripts then follow these steps.
1.
Press  or  until you see Immed Command.
2.
Press CHANGE to highlight the immediate command options. The current setting is
shown.
3.
Press  or  to select either "Enable" or "Disable".
 "Enable" allows the immediate command control character to be processed by the
printer and performs the requested immediate command.
 "Disable" prevents the script and printer from processing the immediate command
control character. Instead, the immediate command control character and
immediate command are treated as data.
← Immed Command →
Disable
CHANGE BACK
SCRIPTS
← Immed Command →
Disable →
SET CANCEL
SCRIPTS
4. When you see the immediate command option you need, press SET to save the
change. Press CANCEL to leave the immediate control setting unchanged.
5. Press BACK until you return to the Home/Online screen.
Disable
CHANGE BACK
SCRIPTS
← Immed Command →
Using Scripts 7-7