Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 58)

S e t t i n g t h e P o w e r - U p M o d e
Power-up mode lets you decide how your printer starts each time you turn it on. If you
want the printer to be ready to start printing when it is turned on, use the Online power-up
mode. If you want the operator enter data before printing, use the Offline power-up
mode.
To change the setting, from the Main Menu, select Setup, then Defaults. Then, follow
these steps.
1.
Press  or  until you see Power-up Mode.
2. Press CHANGE to highlight the power-up mode options. The current setting is shown.
3. Press  or  to scroll through the power-up mode options.
Online
CHANGE BACK
DEFAULTS
Power-up Mode
← Online →
SET CANCEL
DEFAULTS
← Power-up Mode →
4.
When you see the power-up mode you need, press SET to save the change. Press
CANCEL
to leave the power-up mode unchanged.
Online
CHANGE BACK
DEFAULTS
← Power-up Mode →
5.
Press BACK until you return to the Home/Online screen.
6-6 Operator's Handbook