Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 72)

E n a b l i n g a S c r i p t
The script must be enabled before you can use it.
From the Main Menu select Scripts, then follow these steps.
To enable or disable a script:
1. From the Script Menu, press  or  until you see Enable Script.
SCRIPTS
←Enable Script→
Enable
CHANGE BACK
2. Press CHANGE to view the script enabling options.
Note : If a script is not loaded, CHANGE is disabled and you must press BACK and
return to the previous menu. You see:
CHANGE BACK
SCRIPTS
←Enable Script→
No Script Loaded
3. Press  or  to display either Enable or Disable. Selecting "Enable" starts the
script. Selecting "Disable" stops the script. If you select "Enable," when you turn off
the printer and turn it back on, the script automatically starts.
SCRIPTS
Enable Script
← Enable →
SET CANCEL
4. When you see the script enabling setting you need, press SET to save the change.
Press CANCEL to leave the script enabling setting unchanged.
5. If you select “Enable”, the printer automatically returns to the Home/Online screen and
displays ‘Script’ in the upper left corner to indicate the printer has a script loaded and
enabled.
Script
Online
FEED TLABEL MENU
If “Disable” was selected, press CANCEL until you return to the Home/Online screen.
SCRIPTS
←Enable Script→
Disable
SET BACK
7-4 Operator's Handbook