Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 74)

E n a b l i n g S t a t u s P o l l i n g
Status polling allows you to obtain information about the readiness of the printer and the
current (or last received) print job. Your System Administrator can enable status polling
while the printer is running in Script mode. From the Main Menu select Scripts then
follow these steps to enable status polling.
1. Press  or  until you see Status Polling.
2. Press CHANGE to highlight the status polling options. The current setting is shown.
3. Use  or  to display either "ENABLE" or "DISABLE".
← Status Polling →
Disable
CHANGE BACK
SCRIPTS
← Status Polling →
Disable →
SET CANCEL
SCRIPTS
4. When you see the status polling setting you need, press SET to save the change.
Press CANCEL to leave the status polling setting unchanged.
5. Press BACK until you return to the Home/Online screen.
Disable
CHANGE BACK
SCRIPTS
← Status Polling →
7-6 Operator's Handbook