Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 70)

V i e w i n g S c r i p t I n f o r m a t i o n
To see if your printer has a script loaded, from the Main Menu select Scripts, then follow
these steps.
1. Press  or  until you see Script Info.
2. Press ENTER to highlight the script information options. The current setting is shown.
Note : If a script is not loaded, ENTER is disabled and you must press BACK and return
to the previous menu.
3. Press  or to scroll through the script information options.
4. When you see the script information you need, Press SET to save the change. What
you see depends on the script. If a script is not loaded, you see "No script loaded." If
a script is loaded, you see the script name and version number.
If a script is already loaded, see " Enabling a Script ," to continue. If you need to
download a script, see " Formatting Flash Memory " in Chapter 6.
ENTER BACK
SCRIPTS
Script Info
← XXXX →
SET CANCEL
SCRIPTS
← Script Info →
SCRIPTS
Script Info
← XXXX →
SET BACK
SET BACK
SCRIPTS
← Script Info→
7-2 Operator's Handbook