Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 29)

4
S E T T I N G S U P P L Y O P T I O N S
This chapter explains how to select the supply type, ribbon, speed, feed mode,
backfeed, print position, supply position, margin position, cut position, dispense position,
backfeed distance, separators, skip index mode, rotate image, and print contrast.
M a i n Me n u
Cancel
All
Online Batch
Entry Repeat
Batch Format
Options
Setup
Scripts
Diagnostics
Supply
Setting Supply Options 4-1
Contrast
Defaults Port
Settings Flash
Memory RT
Clock
Interpreter
Supply
Type Ribbon Speed Feed
Mode Backfeed Positioning Separators Skip Index Rotate
Image
Your System Administrator may limit access to this menu to prevent changes. You are
prompted to enter a password if password protection is turned on. To continue, ask your
System Administrator for the password.
ENTER BACK
*********
PASSWORD
The supply options are listed in the table below.
Option Choices Default
Supply Type Aperture/Die Cut/Black Mark/Continuous Die Cut
Ribbon No/Yes/High Energy Yes
Speed 2.5/4.0/6.0/Default Default
Feed Mode Continuous/On-Demand/Liner take-up Continuous
Backfeed Off/On Off
Print Position -450 to +450 0
Supply Position -300 to 300 0
Margin Position -99 to 99 0
Dispense Position 50 to 200 65
Backfeed Distance 10 to 100 65
Separators No/Yes/Long No
Skip Index No/Yes No
Rotate Image No/Yes No
To exit an option without changing the setting, press CANCEL.