Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 37)

Setting the Supply Position
This function adjusts the machine to print at the vertical 0,0 point on the supply. Adjust
the supply in or out to easily remove the supply.
The adjustments are in dots (0.0049 inch).
 Increase the number to feed more supply out of the chute.
 Decrease the number to feed less supply out of the chute.
Note: The supply position adjustment should only be made on initial printer setup. For
format adjustments, change the print position.
This option takes effect when you print the next label or tag. Changing supply position
may also affect print position.
1. Press  or  until you see Supply Pos.
CHANGE CANCEL
0
← Supply Pos →
POSITIONING
2. Press CHANGE to highlight the supply positioning options. The current setting is
shown.
3. Press  or  to increment/decrement the supply position.
1 SET CANCEL
[-300/300] 0
Supply Pos
POSITIONING
Note: Pressing the left function button changes the increment/decrement amount
(changes by 1, 10, or 100).
4. When you see the supply position you need, press SET to save the change. Press
CANCEL
to leave the supply position unchanged.
5. Press BACK until you return to the Home/Online screen.
POSITIONING
← Supply Pos →
0
CHANGE BACK
Setting Supply Options 4-9