Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 57)

S e t t i n g t h e S l a s h e d Z e r o A p p e a r a n c e
The slashed zero feature lets you select how you want the zero character printed; either
without a slash, 0 or, with a slash, Ø.
Standard or reduced fonts print the slashed zero character (Ø). Bold and OCR fonts print
the standard zero (0) only. The slashed zero selection does not take affect until the
format is sent to the printer again. If you change the way zero prints, you must resend
your formats.
To access this setting, from the Main Menu, select Setup, then Defaults. Then, follow
these steps.
1. Press  or  until you see Slash Zero.
2. Press CHANGE to highlight the slashed zero options. The current setting is shown.
No
CHANGE BACK
DEFAULTS
Slashed Zero
← No →
SET CANCEL
DEFAULTS
← Slashed Zero →
3.
Press  or  to scroll through the slashed zero options.
4. When you see the slash zero option you need, press SET to save the change. Press
CANCEL
to leave the slash zero setting unchanged.
No
CHANGE BACK
DEFAULTS
← Slashed Zero →
5. Press BACK until you return to the Home/Online screen.
Setting Defaults 6-5