Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 12)

1-4 Operator's Handbook
U s i n g t h e C o n t r o l P a n e l
The control panel consists of a four-line LCD display and five buttons. The top three
buttons are function buttons. The function of each button varies depending on the task.
Each button’s function is shown on the display above the button. The two bottom buttons
are navigation buttons. Use these buttons to scroll through menus.
The LCD display:
 indicates power when text or other information is shown.
 indicates conditions requiring immediate attention
(low battery, faults, errors) using a red background.
N a vi g a t i o n
B u t t o n s
F u n c t i o n
B u t t o n s
MPCL
Online
FEED TLabel MENU
 shows menu prompts, printer settings,
function button assignments, values, etc.
For more information see Chapter 10,
"
Diagnostics & Troubleshooting ."
Power Save Mode
When the printer is idle for longer than 55 minutes, it goes into power save mode, turning
off the display’s back light and all motors. The printer wakes from power save mode
when it receives a format or any button is pressed (printer performs the button’s action).
S e l e c t i n g a F u n c t i o n
The Main Menu has several functions (operating modes). These functions are shown in
the chart below.
M a i n Me n u
Cancel
All
Online Batch
Entry Repeat
Batch Format
Options
Setup
Scripts
Diagnostics
Supply
Contrast
Defaults Port
Settings Flash
Memory RT
Clock
Interpreter
 To display menu options, press  or .
 Press SELECT when you see the menu option you need.
The Main Menu controls the printer's setup and operation. Through the Setup Menu, you
can select a sub-menu for the supply, contrast, default, port settings, flash memory, or
real-time (RT) clock. Each of the sub-menus has several options, such as ribbon, speed,
monetary symbols, and baud rate.
E x i t i n g a F u n c t i o n
There are two ways to exit an option. Pressing BACK once exits to the previous menu
and saves any changes. Pressing CANCEL exits to the previous menu; however, changes
are not saved.