Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 43)

U s i n g R o t a t e I m a g e
Enabling this option rotates the printed image 180°. We recommend designing your
formats as needed, so image rotation is not required. Make sure the loaded supply
matches the image length and width or the rotated image does not print correctly.
Note:
Changing this setting effects jobs sent to the printer after saving the change.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow
these steps.
1. Press  or  until you see Rotate Image.
2. Press CHANGE to highlight the rotate image options. The current setting is shown.
3. Press  or  to view the rotate image options.
4.
When you see the rotate image option you need, press SET to save the change. Press
CANCEL
to leave the rotate image option unchanged.
5.
Press BACK until you return to the Home/Online screen.
SUPPLY
Rotate Image
No →
SET CANCEL
SUPPLY
← Rotate Image →
No
CHANGE CANCEL
SUPPLY
← Rotate Image →
No
CHANGE BACK
Setting Supply Options 4-15