Avery Dennison Monarch 9906 Operator Handbook - Manual (Page 42)

U s i n g S k i p I n d e x
You can use the skip index mode to skip (or ignore) a sense mark and print an image
over multiple labels, if necessary. For example, if you have 4.0" long supplies loaded,
but your image is 8.0" long, enable skip index mode to print the 8.0" long image on two
labels. The image length is determined by the format header. See your System
Administrator or the optional 9906 Packet Reference Manual for more information. The
skip index feature is useful when you have a single format that contains two labels, such
as a shelf label and a carton label.
Note:
When designing the format, make sure text or graphics do not print in the gap of
label rolls.
To access this setting, from the Main Menu, select Setup, then Supply.
1. Press  or  until you see Skip Index.
2. Press CHANGE to highlight the skip index options. The current setting is shown.
3. Press  or  to increment/decrement the print position.
POSITIONING
Skip Index
NO →
SET CANCEL
SUPPLY
← Skip Index →
No
CHANGE CANCEL
4. When you see the print position you need, press SET to save the change. Press
CANCEL
to leave the print position unchanged.
5. Press BACK until you return to the Home/Online screen.
No
CHANGE BACK
SUPPLY
← Skip Index →
4-14 Operator's Handbook