AMETEK Ls Series - Manual (Page 82)

User Manual Lx / Ls Series
78
ENTRY DESCRIPTION
4.2.9).
ADVANCE ON Standard on all Lx Series models.
N/A This feature is optional on Ls Series models. If
installed, this field will display ON. If not, N/A is
shown instead.
MODE ON Standard on all Lx Series models. Allows the
output to be switched between single and
three phase modes of operation.
N/A This feature is optional on Ls Series models. If
installed, this field will display ON. If not, N/A is
shown instead.
CLOCK/LOC N/A Clock and lock is an option. If no –LKM option
is installed, this field will show N/A.
MAST -LKM Option installed. The unit can be used
as a Clock and Lock system master or stand
alone.
AUX -LKS option installed. The unit can be used as
a Clock and Lock system auxiliary or stand
alone.
4.2.13 Elapsed Time and Temperature Screen
The Etime/Temp screen displays the elapsed time since the power source has first been turned
on. This is an accumulated total time in hours, minutes and seconds.
The same screen also displays the internal temperature of the power supply.
ENTRY DESCRIPTION
ETIME 01:23:45 The ETIME field displays the total
accumulated elapsed time for the instrument
since it's initial manufacture. This value cannot
be changed or reset.
TEMP 37.342° The TEMP field is not a user selectable
parameter but rather a read-out of the internal
temperature in degrees Celsius. It is provided
for informational purposes only.