AMETEK Ls Series - Manual (Page 49)

User Manual Lx / Ls Series
45
Connector
RPV (N/A) Table 3-4
BNC Connectors Clock Table 3-6 -LKM / -LKS option
Lock Table 3-6
Ls Series
Other Function Table
SMA Connectors Discrete Fault Indicator Table 3-4
J7-36+ / J7-27-
(Remote Shutdown) Table 3-4
Function Strobe Table 3-4
Trigger Table 3-4
RPV (N/A) Table 3-4
BNC Connectors J1 - Clock Table 3-6 -LKM / -LKS option
J2 - Lock Table 3-6
Table 3-2: Rear Panel Connectors
3.6.1 AC Input Connector – INPUT
See section 3.4 for details on connecting AC input power. Labeled INPUT on Lx models, INTPUT
TB3 on Ls models.
INPUT. Designator
Lx Series Designator
Ls Series Direction Connection
Description
1 L1 ØA Input AC Line
2 L2 ØB Input AC Line
3 L3 ØC Input AC Line
4 GND Gnd symbol Chassis Ground
Table 3-3: AC Input Terminal Block Connection Description
3.6.2 SMA Connectors – Lx Series
SMA connectors. Functions are called out on rear panel decal. Table 3-4 shows connections
from left to right when standing at the rear of the Lx cabinet. SMA connectors are small high
frequency capable coax connectors that can be screwed down securely to prevent signal loss.
Adaptor for SMA to BNC conversion are readily available.
To connect these signals using more conventional BNC cables, SMA Male to BNC Female
adapters may be used. These are available from
www.pasternack.com , P/N PE9074.
PE9074 Adaptor.
SMA Description
FLT Discrete Fault Indicator output. Isolated Open Collector. Can be used to signal
external devices when a fault condition is detected.
INH Remote Inhibit. (TTL input)
TRIGGER Trigger Output (TTL output)