AMETEK Ls Series - Manual (Page 115)

User Manual Lx / Ls Series
111
VOLT FREQ MIN
Standard/Group RTCA A(CF) A(NF) A(WF)
Voltage 1 100 100 100 100
3 101.5 101.5 101.5 101.5
Frequency 380 390 360 360
Standard/Group Group1 Group2 Group3
Voltage 1 104 104 104
3 105.5 105.5 105.5
Frequency 390 360 360
Table 8-1: Normal Voltage and Frequency minimum
Standard/Group RTCA A(CF) A(NF) A(WF)
Voltage 1 122 122 122 122
3 120.5 120.5 120.5 120.5
Frequency 420 410 650 800
Standard/Group Group1 Group2 Group3
Voltage 1 122 122 122
3 120.5 120.5 120.5
Frequency 410 650 800
Table 8-2: Normal Voltage and Frequency Maximum
This test will set the voltage and frequency to levels defined by Table 8-1. The test will last for 30
minutes. The test will be repeated, except group1, using the Voltage setting from Table 8-2 and the
frequency from Table 8-1. The
key (backspace) will terminate the test at any time.
VOLT FREQ MAX
This test will set the voltage and frequency to levels defined by Table 1-2. The test will last for 30
minutes. The test will be repeated, except group1, using the Voltage setting from Table 1-1 and the
frequency from Table 1-2. The unselected phases will remain at 115 volts. The
key
(backspace) will terminate the test at any time.