AMETEK Ls Series - Manual (Page 30)

User Manual Lx / Ls Series
26
Model 3000Lx-HV 4500Lx-HV 6000Lx-HV
Single Phase Mode:
Max. RMS, low Vrange 22.2 A 33.3 A 44.4 A
Three Phase Mode:
Max. RMS, low Vrange
per phase 7.4 A 11.1 A 14.8 A
2.6.2 -EHV Option Lx Series - Supplemental Specifications
Specifications for Lx units with -EHV voltage range option installed are same as standard Lx unit
except where noted below.
Voltage:
Ranges (L-N):
Low range 0 - 200 Vrms
High range 0 - 400 Vrms
Maximum Current at Full Power
Note: Current, maximum amps per phase available at on low voltage range. 3000Lx and 4500Lx
operate in constant power mode up to currents shown at reduced voltage. See Figure 2-1.
For 9000Lx/2 and 12000Lx/2, currents are 2 x 4500Lx and 6000Lx.
For 13500Lx/3 and 18000Lx/3, currents are 3 x 4500Lx and 6000Lx
Model 3000Lx-EHV 4500Lx-EHV 6000Lx-EHV
Single Phase Mode:
Max. RMS, low Vrange 30.0 A 30.0 A 30.0 A
Three Phase Mode:
Max. RMS, low Vrange
per phase 10.0 A 10.0 A 10.0 A
Note: Current derates linearly from 50% of voltage range to 20% of specified current at 10% of
voltage range.
Current in High voltage range is reduced by a factor of 2.
Note: For 9000Lx/2-EHV and 12000Lx/2-EHV, currents are 2 x 4500Lx-EHV and 6000Lx-EHV.
For 13500Lx/3-EHV and 18000Lx/3-EHV, currents are 3 x 4500Lx-EHV and 6000Lx-EHV
Maximum Current at Full Scale Voltage
Model 3000Lx-EHV 4500Lx-EHV 6000Lx-EHV
Single Phase Mode:
Max. RMS, low Vrange 15.0 A 22.5 A 30.0 A
Three Phase Mode:
Max. RMS, low Vrange
per phase 5.0 A 7.5 A 10.0 A