beautypg.com

AMETEK Ls Series User Manual

Page 29

background image

User Manual

Lx / Ls Series

25

- 160

RTCA/DO-160D test firmware.
Includes RCTA-DO160D, section 16, Change #2 and EURO/CAE-14D
AC tests only.

Misc. Options

-L22

Locking Knobs. Shaft lock screws replace knobs to prevent turning of
Voltage and Frequency shuttles.

-LKM

Clock and Lock Master. Enables synchronizing outputs of two Lx AC
sources, one acting as master.
This mode supports a frequency range of 45 to 819 Hz on standard
Lx/Ls models. See section 3.9.

-LKS

Clock and Lock Auxiliary. See -LKM for details. (see Notes) See section
3.9.

-LNS

Line Sync (see Notes)

-EXS

External Sync (see Notes)

-RMS

Set of 2 Rack mount slides. (Left and Right) Recommended to mount Lx
Chassis in 19 inch instrument cabinet.

Notes:

External Trigger input is standard.
Line sync and External sync are mutually exclusive.
External Trigger input and External sync are mutually exclusive.
Units with -LKS (auxiliary) cannot have Line Sync or External Sync.

2.6.1 -HV Option Lx Series - Supplemental Specifications

Specifications for Lx units with -HV voltage range option installed are same as standard Lx unit
except where noted below.

Voltage:

Ranges (L-N):

Low range

0 - 135 Vrms

High range

0 - 270 Vrms

Maximum Current at Full Power

Note: Current, maximum amps per phase available at on low voltage range. 3000Lx and 4500Lx

operate in constant power mode up to currents shown at reduced voltage. See Figure 2-1.
For 9000Lx/2 and 12000Lx/2, currents are 2 x 4500Lx and 6000Lx.
For 13500Lx/3 and 18000Lx/3, currents are 3 x 4500Lx and 6000Lx

Model

3000Lx-HV

4500Lx-HV

6000Lx-HV

Single Phase Mode:
Max. RMS, low Vrange

44.4 A

44.4 A

44.4 A

Three Phase Mode:
Max. RMS, low Vrange
per phase

14.8 A

14.8 A

14.8 A

Note:

Current derates linearly from 50% of voltage range to 20% of specified current at 10% of
voltage range.
Current in High voltage range is reduced by a factor of 2.

Note:

For 9000Lx/2-HV and 12000Lx/2-HV, currents are 2 x 4500Lx-HV and 6000Lx-HV.
For 13500Lx/3-HV and 18000Lx/3-HV, currents are 3 x 4500Lx-HV and 6000Lx-HV

Maximum Current at Full Scale Voltage

This manual is related to the following products: