BINDER KT 53 - Manual (Page 96)

KT (E6) 09/2013 Page 96/135
The alarm list of the selected date is displayed.
The entire sequence of the alarm events (set – acknowledged – cleared) is shown in the event list (chap.
15).
To access the event list, go to
Menu > Event list or User > View event list
Fixed value 08.03.2013 15:05:06
Submenu “Event list” (example).
The events and alarm messages of the current day
are displayed. The most recent message appears at
the end of the list.
..\ Event list
08.03.2013 : Messages of indicated day
14:17:20 Fan setpoint 50.00
14:35:12 Fan setpoint 100.00
14:39:48 Alarm set Safety controller overtemperature
14:40:19 Alarm acknowledged Safety controller
overtemperature
15:03:22 Alarm cleared Safety controller overtemperature
Close Home
14.4.3 Activating, deactivating, and testing the alarm buzzer
Alarm buzzer test
To access the functional test of the alarm buzzer, go to
Menu > Alarms > Buzzer test
Fixed value 08.03.2013 05:05:06
Submenu “Buzzer test”.
The current setting is displayed.
Press the operating button to turn on or off the
buzzer for test purpose.
The modified setting is displayed
“Buzzer test: On” = Buzzer turns on
“Buzzer test: Off” = Buzzer turns off
..\ Buzzer test
Buzzer test: Off
Close Home
When turned on, the alarm buzzer emits an intermittent signal. To turn this off, change the test function to
“Buzzer test: Off”.