BINDER KT 53 - Manual (Page 95)

KT (E6) 09/2013 Page 95/135
14.4.1 List of active alarms
To access the overview list of active alarms, go to Menu > Alarms > Active alarms
Fixed value 08.03.2013 05:05:06
Submenu “Active alarms“.
The active alarm with status “set”
or “acknowledged”,
that has been triggered first is highlighted.
..\ Active alarms
Safety controller overtemperature
Close Home
If no alarm is active (“set” or “acknowledged”), no message will be displayed in this window.
14.4.2 History – list of all alarms
To access the overview list of all alarms, go to Menu > Alarms > History
This list indicates the moment when an alarm was set and when cleared.
Fixed value 08.03.2013 15:05:06
Submenu “History” (example).
The list shows when the alarms of the current day
were triggered and when cleared. The most recent
message appears at the end of the list.
The information that an alarm has been
acknowledged is shown in the event list.
..\ History
08.03.2013 : Messages of indicated day
14:39:48 Alarm set Safety controller overtemperature
15:03:22
Alarm cleared Safety controller overtemperature
Close Home
When there is more information than one page, you can scroll the list in both directions with the operating
button.
To select a different date, select “Messages of indicated day” and press the operating button. You can
enter the desired date through an entry menu.
Fixed value 08.03.2013 05:05:06
Entry menu “Select date”.
The current date is shown. Enter the desired date
with the operating button.
Press the “Ok” button to confirm.
..\ Select date (DD.MM.YYYY)
0 8.03.2013
0
Ins Pos1 End Ok 1 2 3 4 5 6 7 8 9
Close Ok Home