2 turning on / off the optional interior socket – BINDER KT 53 User Manual
Page 32
KT (E6) 09/2013
Page 32/135
Go back to the initial view with “Home”.
This symbol on the controller display indicates that the door heating is active.
7.2 Turning on / off the optional interior socket
For chambers equipped with the water-protected interior socket (option, chap. 19.6) you can turn on and
off the voltage of the interior socket via the controller.
To access the setting menu, go to
Menu > Optional equipment > Interior socket
Fixed value
08.03.2013 05:05:06
Submenu “Interior socket”.
Select the desired setting
and press the operating button.
“Socket On” = socket with activated voltage
“Socket Off” = socket voltage-free
..\ Interior socket
Socket On
Socket Off
Close
Home
Go back to the initial view with “Home”.
This symbol on the controller display indicates that the interior socket is activated.
7.3 Switching on or off the optional zero-voltage relay control outputs
For units equipped with zero-voltage relay outputs (option, chap. 19.5), you can switch on or off the
output via the controller.
To access the setting menu for the operating modes “Fixed value” and “Control off”, go to
Menu > Optional equipment > Zero-voltage relay control outputs.
The setting for program operation is done through the program editor (chap. 9.3.7).
Fixed value
08.03.2013 05:05:06
Submenu “Zero-voltage relay control outputs”.
The current switching state of the zero-voltage relay
control outputs is indicated. To change it, select the
desired control output
and press the operating button.
The modified switching state is displayed.
“Control output On” = zero-voltage relay output
activated
“Control output Off” = zero-voltage relay output
deactivated
..\ Zero-voltage relay control outputs
Control output 1: Off
Control output 2: Off
Control output 3: Off
Close
Home
Go back to the initial view with “Home”.
A symbol on the controller display indicates the switching state of the three zero-voltage relay
control outputs, as soon as at least one control output is activated
(example: control outputs 1 + 2 activated)