BINDER KT 53 - Manual (Page 25)

KT (E6) 09/2013 Page 25/135
Fixed value 08.03.2013 05:05:06
General menu (next page)
(“Optional equipment” menu item is visible only with
optional unit equipment)
..\ Menu
Measurement chart
Optional equipment
Sensor adjustment
Service contact
System information
Close Home
Controller mode
Switching between the operating modes “control off” or “fixed value”,
chap. 6.2.1
Event list Display of status information and errors, chap. 15
Alarms Alarm settings, chap. 14.4
Setpoints Setpoint entry in “Fixed value” operating mode, chap. 8
Safety controller Setting the safety controller, chap. 17.2
Programs Time and week programs, chap. 9 and 10
Import/Export Data transfer via USB interface, chap. 13
Settings General controller settings, chap. 12
Measurement chart Graphical display of the measured values, chap. 16
Optional equipment
Setting for optional equipment like door heating, interior socket,
zero-voltage relay control outputs, alarm output, object temperature
display, chap. 7
(menu item is visible only with optional unit equipment)
Sensor adjustment
Adjustment menu for single-point and two-point adjustments (for
Service purpose)
Service contact Service information
System information Chamber information (model, name, serial no., firmware etc.)