BINDER KT 53 - Manual (Page 111)

KT (E6) 09/2013 Page 111/135
19.3 Data logger kit (option)
The BINDER Data Logger Kit offers an independent long-term measuring system for temperature,
available for different temperature ranges.
The BINDER Data Logger is equipped with a keyboard and a large LCD display, alarm functions and a
real-time function. Measurement data are recorded in the Data Logger and can be read out after the
measurement via the RS232 interface of the Data Logger. It offers a programmable measuring interval
and permits storing up to 64000 measuring values. Reading out is done with the Data Logger evaluation
software. You can give out a combined alarm and status protocol directly to a serial printer.
Data Logger Kit T 220: Measuring sensor for the temperature values of the chamber: Temperature
range -90 °C / 194 °F up to +220 °C / 428 °F.
For detailed information on installation and operation of the BINDER Data Logger, please
refer to the mounting instructions Art. No. 7001-0204 and to the original user manual of the
manufacturer, supplied with the data logger.
19.4 Object temperature display with flexible Pt 100 temperature sensor (option)
You can turn on and off the object temperature display via the controller menu (chap. 7.5).
The object temperature display enables the determination of the actual temperature of the charging
material during the whole process. The object temperature is measured via a flexible Pt100 temperature
sensor and can be viewed at the controller display. You can immerse the sensor top protective tube of the
flexible Pt 100 into liquid substances.
Fixed value 08.03.2013 05:05:06
Initial view with object temperature display
(sample values)
Setpoint Actual value
Temperature [°C]
25.0 25.2
Fan [%]
100.0
Obj. Temp [°C]
25.1
User Quick menu Menu
The object temperature data are put out together with the data of the temperature controller and can be
documented by the communication software APT-COM™ (option, chap. 19.1) developed by BINDER.
Technical data of the Pt100 sensor:
•
Three-wire technique
• Class B (DIN EN 60751)
• Temperature range up to 320 °C / 608°F
• Stainless steel protective tube with a length of 45 mm / 1.78 in, material no. 1.4501