BINDER KT 53 - Manual (Page 108)

KT (E6) 09/2013 Page 108/135
Fixed value 08.03.2013 05:05:06
Entry menu “Setpoint overtemperature”.
Enter the desired value with the operating button.
Press the “Ok” button to confirm.
..\ Setpoint overtemperature
4 5.0 [°C]
4
End , - 0 1 2 3 5 6 7 8 9 Ins Del
Close Ok Home
You can also access this submenu to directly enter the overtemperature safety controller setpoint via
Quick menu > Safety controller setpoint
Entering the safety controller setpoint for undertemperature
Fixed value 08.03.2013 05:05:06
Submenu “Safety controller”
Select “Undertemperature“ with the operating button
and press the operating button to confirm.
..\ Safety controller
Mode
Overtemperature
Undertemperature
Show settings
Close Home
Fixed value 08.03.2013 05:05:06
Entry menu “Setpoint undertemperature”.
Enter the desired value with the operating button.
Press the “Ok” button to confirm.
..\ Setpoint undertemperature
2 0.0 [°C]
2
Pos1 End , - 0 1 3 4 5 6 7 8 9 Ins
Close Ok Home
Go one level back with the “Close” button or back to the initial view with “Home”.