BINDER KT 53 - Manual (Page 61)

KT (E6) 09/2013 Page 61/135
10.1 Starting and running an existing week program
To start a week program, go to Menu > Programs > Week program > Start
(You can also go to Quick menu > Week program > Start , see below).
Starting is also possible directly from the program editor (chap. 10.3.8).
In the “Control off” mode or during a running time or week program, no week program can be
started.
Fixed value 08.03.2013 05:05:06
Submenu “Week program”.
Select “Start” to start an existing week program
and press the operating button
..\ Programs\Week program
Start
Stop
Edit
Create
Rename
Delete
Delete all
Close Home
Fixed value 08.03.2013 05:05:06
Submenu “Select program” (example).
Select one of the programs
and press the operating button to run the program
..\ Select program
Program0004
Program0005
Day-Night
Close Home
If no program has been created and saved so far, the message “No programs found” appears. Press the
operating button to confirm with “Ok” and enter a program with “Create”.
Fixed value 08.03.2013 05:05:06
Entry menu “Start date”.
The current date is shown. For a postponed start,
enter the desired start date with the operating
button.
Press the “Ok” button to confirm.
..\ Start date (DD.MM.YYYY)
0 8.03.2013
4
End Ok 0 1 2 3 5 6 7 8 9 , - Del
Close Ok Home