Altera Stratix III Development Board - Manual (Page 9)

May 2013 Altera Corporation Stratix III 3SL150 Development Board
Reference Manual
2. Board Components
Introduction
This chapter introduces the important components on the Stratix III development
board.
Figure 2–1 illustrates component locations and Table 2–1 describes component
features.
This chapter consists of the following sections:
■ “Featured FPGA (U22)” on page 2–4
■ “MAX II CPLD” on page 2–8
■ “Configuration, Status, and Setup Elements” on page 2–17
■ “Clocking Circuitry” on page 2–25
■ “General User Interfaces” on page 2–28
■ “Components and Interfaces” on page 2–39
■ “On-Board Memory” on page 2–48
■ “Power Supply” on page 2–67
■ “Statement of China-RoHS Compliance” on page 2–70
1 A complete set of board schematics, a physical layout database, and GERBER files for
the Stratix III development board reside in the Stratix III Development Kit documents
directory.
f For information about powering up the development board and installing the demo
software, refer to the
Stratix III Development Kit User Guide .
Board Overview
This section provides an overview of the Stratix III development board, including an
annotated board image and component descriptions.