beautypg.com

Board specific leds, Board specific leds –20 – Altera Stratix III Development Board User Manual

Page 28

background image

2–20

Chapter 2: Board Components

Configuration, Status, and Setup Elements

Stratix III 3SL150 Development Board

May 2013

Altera Corporation

Reference Manual

Board Specific LEDs

There are 18 board-specific, factory-designated LEDs.

Table 2–8

lists the LED board

references, names, and descriptions.

Table 2–8. Board-Specific LEDs

Board

Reference

LED Name

Description

D16

Power

Illuminates when board power switch SW4 is on.

(Requires 14 V to 20 V input to DC input jack J2)

D32

CONF DONE

Illuminates when FPGA is successfully configured. Driven by Stratix III FPGA.

D33

Loading

Illuminates when MAX II CPLD is actively configuring the FPGA. Driven by the MAX II
CPLD.

D34

Error

Illuminates when MAX II CPLD fails to successfully configure the FPGA. Driven by the
MAX II CPLD.

D36

Factory

Illuminates when FPGA is configured with the default factory FPGA design. Driven by
the MAX II CPLD.

D35

User

Illuminates when FPGA is configured with a design other than the default factory FPGA
design. Driven by the MAX II CPLD.

D14

ENET TX

Illuminates when transmit data is active from the Ethernet PHY. Driven by the Marvell
88E1111 PHY.

D15

ENET RX

Illuminates when receive data is active from the Ethernet PHY. Driven by the Marvell
88E1111 PHY.

D6

10 MBytes

Illuminates when Ethernet PHY is using the 10-Mbps connection speed. Driven by the
Marvell 88E1111 PHY.

D7

100 MBytes

Illuminates when Ethernet PHY is using the 100-Mbps connection speed. Driven by
the Marvell 88E1111 PHY.

D8

1000 MBytes

Illuminates when Ethernet PHY is using the 1000-Mbps connection speed. Driven by
the Marvell 88E1111 PHY. Also connects to Stratix III FPGA.

D9

Duplex

Illuminates when Ethernet PHY is both sending and receiving data. Driven by the
Marvell 88E1111 PHY.

D17

HSMC Port A

present

Illuminates when HSMC Port A has a board or cable attached that grounds pin 160.

D10

HSMC Port B

present

Illuminates when HSMC Port B has a board or cable attached that grounds pin 160.

D2

HSMC Port B TX

Illuminates when transmit data is active from the HSMC. Driven by the Stratix III
device.

D3

HSMC Port B RX

Illuminates when receive data is active from the HSMC. Driven by the Stratix III device.

D11

HSMC Port A TX

Illuminates when transmit data is active from the HSMC. Driven by the Stratix III
device.

D12

HSMC Port A RX

Illuminates when receive data is active from the HSMC. Driven by the Stratix III device.