Altera Stratix III Development Board - Manual (Page 43)

Chapter 2: Board Components 2–35
General User Interfaces
May 2013 Altera Corporation Stratix III 3SL150 Development Board
Reference Manual
Figure 2–11 shows a mechanical diagram of the LCD display. The 14-pin receptacle
mounts underneath the display in the holes to the left.
Table 2–34 lists the character LCD display component reference and manufacturing
information.
Graphics LCD
The board contains a 30-pin, fine-pitch connector to interface directly to a 128 × 64 dot
matrix graphics LCD display via a flex-cable that is soldered to the display itself. The
display is an Optrex, part number F-51852GNFQJ-LB-AIN (blue pixels) or
F-51852GNFQJ-LB-CAN (green pixels). The pin-out of this interface connector is
compatible with a variety of displays.
f For the graphics LCD data sheet and related documentation, visit www.optrex.com .
Table 2–35 lists the graphics LCD pin name, description, and type. Signal name and
direction are relative to the Stratix III FPGA.
Figure 2–11. LCD Display Dimensions
15.24 [0.600]
(P2.54 x 7)
24.00 [0.945]
30.00 0.50
[1.18 0.020]
24.00 [0.945]
16.00 [0.630]
V.A.
2.54 [0.100]
13 14
11.50 [0.453]
3.00 [0.118]
7.38 [0.291]
REF.
1 2
A
K
2.00 [0.079]
+
+
+
+
+
+
85.00 0.50 [3.346 0.020] + _ + _
71.20 [2.803]
81.00 [3.189]
66.00 [2.598] V.A.
56.21 [2.213]
4.325 [1.703]
14 - 1.00 [ 0.039]
(PAD 1.80 [ 0.071])
Ο
Ο
Ο
Ο
1.00 [ 0.039]
(5 PLS.)
Ο Ο
2.50 [ 0.098]
(4 PLS.)
Ο Ο
+ _
+ _
Table 2–34. Character LCD Display Component Reference and Manufacturing Information
Board
Reference
Description Manufacturer
Manufacturing
Part Number
Manufacturer
Website
J22
2 × 7 pin, 100 mil, vertical header Samtec TSM-107-01-G-DV www.samtec.com
2 × 16 character display, 5 × 8 dot matrix Lumex Inc. LCM-S01602DSR/C www.lumex.com
Table 2–35. Graphics LCD Header (J24) (Part 1 of 2)
Board
Reference
Description
Schematic
Signal Name
I/O
Standard
Stratix III
Pin Number
J24 pin 6 LCD data bus bit 0 OLED_DATA0 2.5 V AB31
J24 pin 7 LCD data bus bit 1 OLED_DATA1 2.5 V AG32
J24 pin 8 LCD data bus bit 2 OLED_DATA2 2.5 V AB27
J24 pin 9 LCD data bus bit 3 OLED_DATA3 2.5 V AC32