Altera Arria V GX Starter Board - Manual (Page 35)

Chapter 2: Board Components 2–27
Components and Interfaces
November 2013 Altera Corporation Arria V GX Starter Board
Reference Manual
Table 2–29 lists the LCD pin definitions, and is an excerpt from Lumex data sheet.
f
For more information such as timing, character maps, interface guidelines, and other
related documentation, visit
www.lumex.com .
Table 2–30 lists the LCD component references and the manufacturing information.
Components and Interfaces
This section describes the starter board's communication ports and interface cards
relative to the Arria V GX. The development board supports the following
communication ports:
■ PCI Express
■ 10/100/1000 Ethernet
■ HSMC
■ SDI video output/input
■ HDMI video output
Table 2–29. LCD Pin Definitions and Functions
Pin
Number
Symbol
Level
Function
1 V
DD
—
Power supply
5 V
2 V
SS
— GND (0 V)
3 V
0
— For LCD drive
4 RS H/L
Register select signal
H: Data input
L: Instruction input
5 R/W H/L
H: Data read (module to MPU)
L: Data write (MPU to module)
6 E H, H to L Enable
7–14 DB0–DB7 H/L Data bus—software selectable 4-bit or 8-bit mode
Table 2–30. LCD Component References and Manufacturing Information
Board
Reference
Description Manufacturer
Manufacturer
Part Number
Manufacturer
Website
J16
2×7 pin, 100 mil, vertical header Samtec TSM-107-07-G-D www.samtec.com
2×16 character display, 5×8 dot matrix Lumex Inc. LCM-S01602DSR/C www.lumex.com