Optional features, Configuration via protocol (cvp) – Altera Arria V GZ Avalon-ST User Manual
Page 196
Optional Features
14
2014.12.15
UG-01127_avst
Configuration via Protocol (CvP)
The Hard IP for PCI Express architecture has an option to configure the FPGA and initialize the PCI
Express link. In prior devices, a single Program Object File (.pof) programmed the I/O ring and FPGA
fabric before the PCIe link training and enumeration began. The .pof file is divided into two parts:
• The I/O bitstream contains the data to program the I/O ring, the Hard IP for PCI Express, and other
elements that are considered part of the periphery image.
• The core bitstream contains the data to program the FPGA fabric.
When you select the CvP design flow, the I/O ring and PCI Express link are programmed first, allowing
the PCI Express link to reach the L0 state and begin operation independently, before the rest of the core is
programmed. After the PCI Express link is established, it can be used to program the rest of the device.
The following figure shows the blocks that implement CvP.
Figure 14-1: CvP in Arria V GZ Devices
PCIe Port
Altera FPGA
Host CPU
Config Cntl
Block
Active Serial,
Fast Passive Parallel (FPP), or
Active Quad
Device Configuration
PCIe Link
used for
Configuration
via Protocol (CvP)
Serial or
Quad Flash
Hard IP
for PCIe
©
2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html
. Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
www.altera.com
101 Innovation Drive, San Jose, CA 95134