Altera SDI II MegaCore - Manual (Page 86)

Signal Width Direction Description
gxb_ltr 1 Output Control signal to the transceiver
rx_set_locktoref
input signal.
Assert this signal to program the Rx CDR to lock manually to
reference mode.
Note: Applicable only for Arria 10 devices.
gxb_ltr_b 1 Output Control signal to the transceiver
rx_set_locktoref
input signal.
Assert this signal to program the RX CDR to lock manually to
reference mode (link B). Applicable for HD-SDI dual link
receiver protocol configuration only.
Note: Applicable only for Arria 10 devices.
gxb_ltd 1 Output Control signal to the transceiver
rx_set_locktodata
input
signal.
Assert this signal to program the RX CDR to lock manually to
data mode.
Note: Applicable only for Arria 10 devices.
gxb_ltd_b 1 Output Control signal to the transceiver
rx_set_locktodata
input
signal.
Assert this signal to program the RX CDR to lock manually to
data mode (link B). Applicable for HD-SDI dual link receiver
protocol configuration only.
Note: Applicable only for Arria 10 devices.
trig_rst_ctrl 1 Output
Asynchronous reset output signal to the transceiver reset
controller to reset the transceiver.
Note: Applicable only for Arria 10 devices.
4-44 SDI II IP Core Signals
UG-01125
2015.05.04
Altera Corporation SDI II IP Core Functional Description
Send Feedback