Altmult_accum (multiply-accumulate), Altmult_accum (multiply-accumulate) -1 – Altera Integer Arithmetic IP User Manual
Page 82
ALTMULT_ACCUM (Multiply-Accumulate)
8
2014.12.19
UG-01063
The ALTMULT_ACCUM megafunction allows you to implement a multiplier-adder.
The following figure shows the ports for the ALTMULT_ACCUM megafunction.
Figure 8-1: ALTMULT_ACCUM Ports
dataa[]
inst
ALTMULT_ACCUM
sourcea
scanina[]
scanouta[]
signa
datab[]
scaninb[]
sourceb
signb
accum_sload
accum_sload_upper_data[]
addnsub
mult_round
mult_saturation
clock0
ena0
clock1
ena1
clock2
ena2
clock3
ena3
scanoutb[]
result[]
overflow
mult_is_saturated
accum_is_saturated
aclr0
aclr1
aclr2
aclr3
datac[]
coefsel[]
©
2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html
. Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
www.altera.com
101 Innovation Drive, San Jose, CA 95134