Turning Technologies Insight 360 Cloud - Manual (Page 10)

Insight 360 10
IMPORTANT
Prior to downloading, verify with your institution which version of the software is supported.
1 Sign in to your Turning Account.
2 Select Downloads from the left menu.
3 Select the appropriate program.
4 Save the file to a specified location.
5 Open the file and follow the on-screen instructions.
Setting Up the Mobi 360 and Clickers
Mobi 360 is the mobile interactive whiteboard used to display coursework, annotate your computer desktop, and pose
interactive questions. The Mobi 360 comes with a receiver, USB cable, charging stand and digital pen.
NOTE
Skip this task if you are not using a Mobi 360 with Insight 360 Cloud.
1 Unpack the hardware from the packaging.
2 If necessary, charge the Mobi 360 mobile interactive
whiteboard and digital pen.
NOTE
The Mobi 360 and digital pen are
delivered partially charged to allow you
to use these items immediately after
unpacking the box. However, it is
recommended to charge these items for
approximately eight hours before
beginning normal use.
3 Plug the Mobi 360 receiver into an available USB
port on your computer. The receiver is located on the
back of the Mobi 360.
NOTE
You must use a powered USB hub if a
USB hub is needed.
4 Turn on the Mobi 360 by pressing the blue power button at the top of the device.
The message Please wait while a connection to Insight is being established is displayed on the Mobi 360 screen.
5 Press and release the blue button on the Mobi 360 receiver while the receiver is still inserted into the USB port on your
computer.
6 Tap Continue on the Mobi 360.
The message Please wait while a connection to Insight is being established is displayed on the Mobi 360 screen.
turningtechnologies.com/user-guides